Data Center OutreachNewsDesksDirectoryValvesValve specs
Pratt Industrial, a Mueller brand. Butterfly valves for data center chilled water systems
Home / Valves
Selection

Pressure Drop Across Butterfly Valves in Cooling Loops

Why a fully open butterfly valve costs little head, where the losses add up and how to include valves in a pump calculation.

Where pressure drop shows up

Every valve, fitting and strainer in a loop adds head the pump must overcome. Butterfly valves open fully have a low loss for their size, but a plant with dozens of them in series still adds up.

Use K or Cv consistently

Piping designers carry valve losses as a K value or as Cv. Pick one method and use it across the loop, so the numbers match. Mixed methods are a common source of error in pump sizing.

The disc stays in the flow

A butterfly disc sits in the center of the flow path even when open. That is why its loss is higher than a full port ball valve of the same size, and why very high velocities are worth avoiding near the valve.

Partial opening

A valve used to throttle can drop much more pressure. Make sure the pump curve and system curve are checked with the valve at its working position, not only wide open.

What the spec should say

State the maximum allowable pressure drop for isolation valves if the project has a tight head budget, and ask for the Cv on the submittal.

Need the data or a price?
Copy the guide spec, basis of design and schedule rows, or ask for pricing and stock on butterfly valves for chillers, condenser water, liquid cooling and critical facilities.

Keep reading