SelectionHow resilient seated and double offset butterfly valves differ, what API 609 Category A and B mean, and when to step up to a high performance valve.
A resilient seated butterfly valve has a soft seat, usually an elastomer, that the disc presses into. This gives bubble tight shutoff at moderate pressures and temperatures at a good price. They are covered by API 609 Category A and are the standard choice for chilled water, condenser water and many glycol loops.
A double offset valve moves the stem away from the disc centerline and the seat centerline. The disc lifts off the seat almost as soon as it starts to turn, which reduces seat wear and lowers operating torque. Seat materials can be metal or high performance polymers, so the valve handles higher pressures and temperatures. These are API 609 Category B valves.
In the Pratt Industrial lineup, BF is rated 250 psi up to 12 inch and 150 psi from 14 to 24 inch. OS is 200 psi up to 12 inch and 150 psi up to 48 inch. HP is rated 285 psi in Class 150, 740 psi in Class 300 and 1440 psi in Class 600, with fire safe design to API 607.
Start with the highest working pressure in the line, including pump shutoff head and any surge. Check the temperature and the fluid. If a resilient seated valve covers them with margin, it is usually the better value. Move to double offset when pressure or temperature is higher, when fire safe is required, or when the valve will see frequent cycling.
Valves that open and close often, such as automatic isolation for fail over, benefit from double offset construction because the seat sees less rubbing. Torque is also lower, which can allow a smaller actuator.
Specify the category (A or B), the pressure class, the seat material and the fire safe standard if required. The valve kit page has the specifics for each series.