InstallationMistakes that cause leaks, damaged liners and stuck discs, and the checks that prevent them.
Install the valve with the disc slightly open so the seat is not crushed when the flange bolts are tightened. Fully closed installation can damage the seat.
Weld neck flanges and lined pipe can have a smaller bore than the valve disc needs. Check disc clearance before installing.
Tighten flange bolts evenly, in a star pattern, to the torque in the manufacturer's guide. Uneven tightening distorts the seat and causes leaks.
Large valves and actuators need support. Check stem orientation so the actuator is not hanging off the pipe without a brace.
Flush the line before cycling valves. Slag and sand cut seats, and a new valve can be ruined before startup.