Data Center OutreachNewsDesksDirectoryValvesValve specs
Pratt Industrial, a Mueller brand. Butterfly valves for data center chilled water systems
Home / Valves
Actuation

Butterfly Valve Torque and Actuator Sizing Basics

What goes into valve torque, why safety factors matter and what information an actuator supplier needs from you.

Where torque comes from

Valve torque has three main parts: seating torque to break the seat seal, bearing friction on the stem, and hydrodynamic torque from flow pushing on the disc. The highest number usually occurs at the start of opening or the end of closing.

Why pressure and flow matter

Higher differential pressure raises torque, especially in larger valves. Valve torque tables are published at a stated differential pressure. Use the actual maximum differential for your system, not just the rated pressure of the valve.

Safety factor

Actuator suppliers apply a safety factor to the published torque to cover aging seats, cold starts and supply voltage drop. Follow the supplier's sizing guide rather than picking the next size up by feel.

What to send the supplier

Valve size, series, differential pressure, fluid, temperature, open and close time, fail position, power supply and control signal. With that, the supplier can size and quote the package.

Spec language

Say who supplies, mounts and calibrates the actuator, and require an ISO 5211 mounting pad on the valve so actuators fit without custom brackets.

Need the data or a price?
Copy the guide spec, basis of design and schedule rows, or ask for pricing and stock on butterfly valves for chillers, condenser water, liquid cooling and critical facilities.

Keep reading