Immersion Cooling: How It Works, Benefits and Challenges
Servers are placed in a special fluid that carries heat away. Here is what that involves.
Key takeaways
- Immersion cooling places server hardware in a non-conductive liquid that absorbs heat directly.
- It can handle very dense equipment and reduce fans, but changes how operations and maintenance work.
- Fluid choice, hardware compatibility and serviceability are the key questions.
Most servers are cooled by moving air across them. Immersion cooling takes a different approach. The hardware sits in a tank filled with a liquid that does not conduct electricity. The liquid absorbs heat from the components directly and carries it to a heat exchanger.
Two main types
- Single-phase immersion: the fluid stays liquid. Pumps or natural convection move it past the hardware and through a heat exchanger, where the heat transfers to a water loop.
- Two-phase immersion: the fluid boils at a low temperature on hot surfaces. The vapor rises, condenses on a cooled coil at the top of the tank, and drips back down. The phase change moves a lot of heat efficiently.
In both cases, the heat ends up in a water loop that connects to the facility cooling system, such as dry coolers or a chilled water plant.
Potential benefits
- Very high heat removal from a small footprint, which suits dense computing.
- Little or no need for server fans, which can reduce power use and noise.
- Less exposure of components to dust and air contaminants.
- The possibility of warmer facility water temperatures, which can help with heat rejection.
Actual results vary by design, so claims should be checked against measured data for the specific system.
Challenges
- Hardware compatibility: not every server, connector, cable or storage device is rated for immersion. Warranty terms need to be confirmed with the equipment maker.
- Serviceability: pulling equipment from a tank is messier than sliding a server out of a rack. Procedures, lifting aids and drip management are needed.
- Floor loading: tanks full of fluid are heavy. Structural review is essential.
- Fluid handling: fluids have their own safety, storage, spill and disposal requirements. Some fluids have environmental considerations that should be reviewed.
- Standards and skills: fewer established practices exist than for air cooling, and staff need training.
- Fire and code review: local authorities may have specific requirements for the fluid and tank arrangement.
When it makes sense
Immersion tends to be considered where heat density is very high, space is limited, or the operator wants to control a tightly specified deployment. It is often introduced in a dedicated area rather than across a whole facility.
Planning should also cover the support spaces around the tanks. Fluid storage, cleaning areas, lifting equipment and spare parts all need room. Operations teams usually need written procedures and hands-on training before the first tank goes live.
Questions to ask
- Which fluid is used, and what are its safety and environmental properties?
- Is the planned hardware certified for immersion?
- How is equipment removed, serviced and cleaned?
- What is the structural load per tank?
- How does the tank heat exchanger connect to the facility water loop?
- What is the plan for leaks, spills and fluid disposal?
Immersion cooling is a real option, not a universal answer. It works best when chosen for a clear reason and planned with operations in mind.
This article is general information for public education. It is not legal, tax, financial or engineering advice. Rules and conditions differ by location, so check with qualified local professionals. Spot an error? Write to info@datacenteroutreach.com and we will correct it.