Subscribe
Water and Cooling

Cooling Towers and Condenser Water: How They Work and Why Treatment Matters

Cooling towers reject heat by evaporating a small part of the water. Treatment keeps the system safe and efficient.

Key takeaways

  • A cooling tower rejects heat mainly by evaporating a portion of the water that passes through it.
  • As water evaporates, minerals concentrate, so some water must be removed and replaced.
  • Water treatment protects equipment, controls bacteria, and affects how much water the site uses.

A cooling tower is one of the most recognizable pieces of equipment at a data center. It is also one of the most misunderstood. Its job is to take heat from the condenser water loop and release it to the atmosphere.

How a tower works

Warm water returns from the chillers and is sprayed over a material called fill, which spreads it into thin films. A fan moves outside air through the fill. A small portion of the water evaporates, and that evaporation carries away heat. The remaining water, now cooler, collects in a basin and returns to the chillers.

Evaporation is a very effective way to move heat, which is why towers can be energy efficient. The tradeoff is that the evaporated water is consumed and must be replaced.

Why water has to be removed

When pure water evaporates, the dissolved minerals stay behind. Without action, the water in the loop gets more concentrated over time. To control this, operators remove some water, called blowdown, and add fresh makeup water. The number of times the water can be concentrated before blowdown is often called cycles of concentration. Higher cycles generally mean less water use, but only if the chemistry can handle it.

What water treatment does

  • Scale control: prevents minerals from depositing on heat transfer surfaces, which reduces efficiency.
  • Corrosion control: protects piping, heat exchangers and chillers from damage.
  • Biological control: limits the growth of bacteria and algae. Warm, open water can support organisms that affect equipment and, in some cases, health. Programs for managing Legionella are a standard part of responsible operation.
  • Solids control: filtration and monitoring keep debris and sediment from building up.

Treatment is usually a combination of chemicals, filtration and continuous monitoring. Programs vary by water quality, climate and local rules.

Where the water comes from

Makeup water can come from a public supply, wells, reclaimed water or other sources. Poorer quality water can raise treatment needs. Discharge of blowdown is also regulated, so the site needs a plan for where it goes and what it may contain.

Operational considerations

  • Towers are exposed to weather, so freeze protection matters in cold climates.
  • Drift, the fine mist that escapes the tower, is limited by eliminators.
  • Noise and visible plumes can matter to neighbors and should be addressed early.
  • Towers need regular inspection, cleaning and basin maintenance.

Questions to ask

  1. What water source supplies the towers, and what is its quality?
  2. What cycles of concentration does the design target?
  3. Who runs the treatment program, and how is it monitored?
  4. What is the written plan for bacterial control?
  5. Where does blowdown go, and is it permitted?
  6. How will the site maintain cooling if a tower cell is out of service?

Cooling towers are well understood technology. When treated and maintained properly, they are reliable and efficient.

Found this useful? Pass it on.

This article is general information for public education. It is not legal, tax, financial or engineering advice. Rules and conditions differ by location, so check with qualified local professionals. Spot an error? Write to info@datacenteroutreach.com and we will correct it.

Have news, a project or a question?Send a press release, your company details, a data center project or a question. We read everything.
Send it in